TP-Link AD7200 AD7200 V1 User Guide - Page 10
LED Explanation, Button Description
View all TP-Link AD7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Chapter 1 LED Explanation Name ( 5GHz Wireless) ( 60GHz Wireless) (Ethernet) (Internet) (WPS) (USB) Status On Off On Off On Off Blue On Orange On Off On/Off Flashing On Flashing Off Indication The 5GHz wireless band is working properly. The 5GHz wireless band is disabled. The 60GHz wireless band is working properly. The 60GHz wireless band is disabled. At least one Ethernet port is connected. No Ethernet port is connected. Internet is available. The router's Internet port is connected, but the Internet is not available. The router's Internet port is not connected. Turns On when a WPS synchronization is established and automatically turns Off about 5 minutes later. A wireless device is trying to connect to the network via WPS. This process may take up to 2 minutes. The USB device is identified and ready to use. The USB device is being identified. No USB device is plugged into the USB port or the USB device is not identified or USB device has been safely ejected. The following buttons (view from left to right) are also located on the front panel. Button Description Buttons (Wi-Fi Button) (WPS Button) Description Press this Wi-Fi button for about 2 seconds to turn on or off the wireless function of your router. Press this WPS button, and immediately press the WPS button on your client device. The WPS LED of the router should change from flashing to solid on, indicating successful WPS connection. (LED Button) Press the LED button for about 1 second to turn on or off the LEDs of your router. 6