TP-Link AD7200 AD7200 V1 User Guide - Page 84
Enable IPTV, Bridge, Custom, IPTV Multicast VLAN ID, Multicast VLAN Priority, Russia
View all TP-Link AD7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Chapter 12 2 ) Click Save. 3 ) After configuring IGMP proxy, IPTV can work behind your router now. You can connect your set-top box to any of the router's Ethernet port. If IGMP is not the technology your ISP applies to provide IPTV service: 1 ) Tick the Enable IPTV check box. 2 ) Select the appropriate Mode according to your ISP. Select Bridge if your ISP is not listed and no other parameters are required, and then skip to Step 4. Select Custom if your ISP is not listed but provides necessary parameters. Done! 3 ) After you have selected a mode, the necessary parameters are predetermined. You can perform other configuration, e.g. enter the IPTV Multicast VLAN ID and select the IPTV Multicast VLAN Priority in Russia mode according to your ISP. 4 ) For Russia, Singapore-ExStream, Malaysia-Unifi and Malaysia-Maxis mode, connect the set-top box to the predetermined LAN port. For Bridge and Custom mode, select the LAN type and connect the set-top box to the corresponding port. 5 ) Click Save. Your IPTV setup is done now! You may need other configurations on your set-top box before enjoying your TV. Tips Qos and IPTV cannot be enabled at the same time. 80