TP-Link AD7200 AD7200 V1 User Guide - Page 26
Setting Up an IPv6 Internet Connection, PPPoE, Dynamic IPSLAAC/DHCPv6, Static IP, 6to4 tunnel
View all TP-Link AD7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 4 Tips: 1. If you use Dynamic IP and PPPoE and you are provided any other parameters that are not required on the page, please go to Advanced > Network > Internet to complete the configuration. 2. If you still cannot connect to the Internet, refer to FAQ for further instructions. 4. 3. Setting Up an IPv6 Internet Connection Your ISP provides information about one of the following Internet connection types: PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge). 1. Visit http://tplinkwifi.net, then log in with the username and password you set for the router. 2. Go to Advanced > IPv6. 22
22
Chapter 4
Tips:
1. If you use
Dynamic IP
and
PPPoE
and you are provided any other parameters that are not required on the page,
please go to
Advanced
>
Network
>
Internet
to complete the configuration.
2. If you still cannot connect to the Internet, refer to
FAQ
for further instructions.
4. 3.
Setting Up an IPv6 Internet Connection
Your ISP provides information about one of the following Internet connection types:
PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel,
Pass-Through (Bridge).
1. Visit
http://tplinkwifi.net
, then log in with the username and password you set for the
router.
2. Go to
Advanced
>
IPv6
.