TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 CLI Reference Guide Guide - Page 116
dot1x port-method
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Parameter auto | authorized-force | unauthorized-force -- The Control Mode for the port. auto: In this mode, the port will normally work only after passing the 802.1X Authentication. authorized-force: In this mode, the port can work normally without passing the 802.1X Authentication. unauthorized-force: In this mode, the port is forbidden working for its fixed unauthorized status. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the Control Mode for port 1/0/20 as "authorized-force": T1500-28PCT(config)#interface fastEthernet 1/0/20 T1500-28PCT(config-if)#dot1x port-control authorized-force 13.12 dot1x port-method Description The dot1x port-method command is used to configure the control type of IEEE 802.1X for the specified port. By default, the control type is "mac-based". To restore to the default configuration, please use no dot1x port-method command. Syntax dot1x port-method { mac-based | port-based } no dot1x port-method Parameter mac-based | port-based --The control type for the port. 103