TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 CLI Reference Guide Guide - Page 181
loopback-detection recover
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
recovery-mode -- The mode how the blocked port recovers to normal status. Auto: Block status can be automatically removed after recovery time. Manual: Block status can only be removed manually. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the loopback detection process-mode as port-based and recovery-mode as manual for port 1/0/2: T1500-28PCT(config)#interface fastEthernet 1/0/2 T1500-28PCT(config-if)# loopback-detection config process-mode port-based recovery-mode manual 20.6 loopback-detection recover Description The loopback-detection recover command is used to remove the block status of selected ports/LAGs, recovering the blocked ports to normal status, Syntax loopback-detection recover Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Recover the blocked port 1/0/2 to normal status: T1500-28PCT(config)#interface fastEthernet 1/0/2 168