TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 CLI Reference Guide Guide - Page 157
duplex
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin and Operator level users have access to these commands. Example Enable the flow-control function for port 1/0/3: T1500-28PCT(config)#interface fastEthernet 1/0/3 T1500-28PCT(config-if)# flow-control 16.6 duplex Description The duplex command is used to configure the Duplex Mode for an Ethernet port. To return to the default configuration, please use no duplex command. Syntax duplex { auto | full | half } no duplex Parameter auto | full | half -- The duplex mode of the Ethernet port. There are three options: auto-negotiation mode, full-duplex mode and half-duplex mode. By default the port is auto-negotiation mode. Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet / interface port-channel / interface range port-channel) Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the Duplex Mode as full-duplex for port 1/0/3: T1500-28PCT(config)#interface fastEthernet 1/0/3 T1500-28PCT(config-if)# duplex full 144