TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 CLI Reference Guide Guide - Page 49
port-channel load-balance
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Example Add ports 2-4 to EtherChannel Group 1 and enable the static LAG: T1500-28PCT(config)# interface range fastEthernet 1/0/2-4 T1500-28PCT(config-if-range)# channel-group 1 mode on 5.2 port-channel load-balance Description The port-channel load-balance command is used to configure the Aggregate Arithmetic for LAG. To return to the default configurations, please use no port-channel load-balance command. Syntax port-channel load-balance { src-mac | dst-mac | src-dst-mac | src-ip | dst-ip | src-dst-ip } no port-channel load-balance Parameter src-mac -- The source MAC address. When this option is selected, the Aggregate Arithmetic will be based on the source MAC address of the packets. dst-mac -- The destination MAC address. When this option is selected, the Aggregate Arithmetic will be based on the destination MAC address of the packets. src-dst-mac -- The source and destination MAC address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination MAC addresses of the packets. The Aggregate Arithmetic for LAG is "src-dst-mac" by default. src-ip -- The source IP address. When this option is selected, the Aggregate Arithmetic will be based on the source IP address of the packets. dst-ip -- The destination IP address. When this option is selected, the Aggregate Arithmetic will be based on the destination IP address of the packets. src-dst-ip -- The source and destination IP address. When this option is selected, the Aggregate Arithmetic will be based on the source and destination IP addresses of the packets. 36