TP-Link T1500-28TC TL-SL2428 T1500-28TCUN V1 CLI Reference Guide Guide - Page 275
lldp tlv-select
View all TP-Link T1500-28TC TL-SL2428 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the SNMP notification for port 1/0/1: T1500-28PCT(config)#interface fastEthernet 1/0/1 T1500-28PCT(config-if)#lldp snmp-trap 26.7 lldp tlv-select Description The lldp tlv-select command is used to configure TLVs to be included in outgoing LLDPDU. To exclude TLVs, please use no lldp tlv-select command. By default, All TLVs are included in outgoing LLDPDU. Syntax lldp tlv-select { [ port-description ] [ system-capability ] [ system-description ] [ system-name ] [ management-address ] [ port-vlan ] [ protocol-vlan ] [ vlan-name ] [ link-aggregation ] [ mac-phy-cfg ] [ max-frame-size ] [ power ] [ all ] } no lldp tlv-select { [ port-description ] [ system-capability ] [ system-description ] [ system-name ] [ management-address ] [ port-vlan ] [ protocol-vlan ] [ vlan-name ] [ link-aggregation ] [ mac-phy-cfg ] [ max-frame-size ] [ power ] [ all ] } Command Mode Interface Configuration Mode (interface fastEthernet / interface range fastEthernet / interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Exclude "management-address" and "port-vlan-id" TLVs in LLDPDU outgoing from port 1/0/1: T1500-28PCT(config)#interface fastEthernet 1/0/1 T1500-28PCT(config-if)# no lldp tlv-select management-address port-vlan 262