TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 191
access-list policy action, access-list bind aclinterface
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
21.7 access-list policy action Description The access-list policy action command is used to add ACLs for the policy. To delete the corresponding actions, please use no access-list policy action command. Syntax access-list policy action policy-name acl-id no access-list policy action policy-name acl-id Parameter policy-name -- The Policy Name, ranging from 1 to 16 characters. acl-id -- The ID of the ACL to which the above policy is applied. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Add ACL whose ID is 120 for policy1: T1500G-10MPS(config)# access-list policy action policy1 120 21.8 access-list bind acl(interface) Description The access-list bind acl command is used to bind an ACL to the specified port. To cancel the bind relation, please use no access-list bind acl command. Syntax access-list bind acl acl-id no access-list bind acl acl-id Parameter acl-id -- The ID of the ACL desired to bind. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) 178