TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 60
user access-control port-based
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Parameter mac-addr -- The source MAC address. Only the user with this MAC address is allowed to access the switch. [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] -- Specify the access interface. These interfaces are enabled by default. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure that only the user whose MAC address is 00:00:13:0A:00:01 is allowed to access the switch: T1500G-10MPS(config)# user access-control mac-based 00:00:13:0A:00:01 6.5 user access-control port-based Description The user access-control port-based command is used to limit the ports for accessing. Only the users connected to these ports you set here are allowed to login. To cancel the user access limit, please use no user access-control command. Syntax user access-control port-based interface { gigabitEthernet port-list } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control Parameter port-list --The list group of Ethernet ports, in the format of 1/0/1-4. You can appoint 5 ports at most. [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] -- Specify the access interface. These interfaces are enabled by default. 47