TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 96
logging file flash
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Syntax logging buffer level level no logging buffer level Parameter level -- Severity level of the log information output to each channel. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output. By default, it is 6 indicating that the log information with level 0-6 will be saved in the log buffer. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Set the severity level as 5: T1500G-10MPS(config)#logging buffer level 5 11.3 logging file flash Description The logging file flash command is used to store the log messages in a file in the flash on the switch. To disable the log file flash function, please use no logging file flash command. This function is disabled by default. The log file flash indicates the flash sector for saving system log. The information in the log file of the flash will not be lost after the switch is restarted and can be got by the show logging flash command. Syntax logging file flash no logging file flash Command Mode Global Configuration Mode 83