TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 243
range, ip igmp filter
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
Example Configure the filtering mode of profile 1 as permit: T1500G-10MPS(config)# ip igmp profile 1 T1500G-10MPS(config-igmp-profile)#permit 24.21 range Description The range command is used to configure the range of the profile's filtering multicast address. To delete the corresponding filtering multicast address, please use no range command. A profile contains 16 filtering IP-range entries at most. Syntax range start-ip end-ip no range start-ip end-ip Parameter start-ip -- The start filtering multicast IP address. end-ip -- The end filtering multicast IP address. Command Mode Profile Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure one of the filter multicast address entry as range 225.1.1.1 to 226.3.2.1 in profile 1: T1500G-10MPS(config)# ip igmp profile 1 T1500G-10MPS(config-igmp-profile)#range 225.1.1.1 226.3.2.1 24.22 ip igmp filter Description The ip igmp filter command is used to bind the specified profile to the interface. To delete the binding, please use no ip igmp filter command. 230