TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 285
enable admin password
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 285 highlights
Example Enable the AAA function globally: T1500G-10MPS(config)# aaa enable 27.2 enable admin password Description The enable admin password command is used to elevate the current logged-in user from guest to admin and gain administrator level privileges. The authentication password is possibly authenticated in RADIUS/TACACS+ servers, user-defined server groups or local on the switch. To remove the password, please use no enable admin password command. This command uses the symmetric encryption. Syntax enable admin password { [ 0 ] password | 7 encrypted-password } no enable admin password Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- A string from 1 to 31 alphanumeric characters or symbols. The password is case sensitive, allows digits, English letters (case sensitive), underlines and sixteen special characters By default, it is empty. 7 -- Indicates a symmetric encrypted password with fixed length will follow. encrypted-password -- A symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password to elevate the priviledge. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. 272