TP-Link T1500G-10PSTL-SG2210P T1500G-10PSUN V1 CLI Reference Guide Guide - Page 273
TP-Link T1500G-10PSTL-SG2210P Manual
View all TP-Link T1500G-10PSTL-SG2210P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 273 highlights
Chapter 26 LLDP Commands LLDP function enables network devices to advertise their own device information periodically to neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its neighbor in a standard MIB, so it is possible for the information to be accessed by a Network Management System (NMS) such as SNMP. 26.1 lldp Description The lldp command is used to enable LLDP function. To disable the LLDP function, please use no lldp command. Syntax lldp no lldp Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable LLDP function globally: T1500G-10MPS(config)#lldp 26.2 lldp hold-multiplier Description The lldp hold-multiplier command is used to configure the Hold Multiplier parameter. The aging time of the local information in the neighbor device is determined by the actual TTL value used in the sending LLDPDU. TTL = Hold Multiplier * Transmit Interval. To return to the default configuration, please use no lldp hold-multiplier command. Syntax lldp hold-multiplier multiplier no lldp hold-multiplier 260