TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 CLI Reference Guide Guide - Page 142
mac address-table notification interface
View all TP-Link T1600G-18TSTL-SG2216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
• forward: The packets will be forward but not be learned when learned MAC number exceeds the the maximum MAC address number on this port. • drop: The packets will be dropped when learned MAC number exceeds the the maximum MAC address number on this port. • disable: The MAC address threshold on this port is disabled. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable Port Security function for port 1/0/1, select Static mode as the learn mode, and specify the maximum number of MAC addresses that can be learned on this port as 30. When the number of MAC address entries reaches 30 on this port, new entry will be dropped : T1600G-52TS(config)# interface gigabitEthernet 1/0/1 T1600G-52TS(config-if)# mac address-table max-mac-count max-number 30 mode static status drop 17.6 mac address-table notification (interface) Description The mac address-table notification command is used to configure the MAC change notification on port. Syntax mac address-table notification { [ learn-mode-change enable | disable ] [ exceed-max-learned enable | disable ] [ new-mac-learned enable | disable ] } Parameter learn-mode-change enable | disable -- Enable/Disable the learn-mode-change notification. With this feature enabled, a SNMP notification is generated and sent to the network management system (NMS) when the learning mode of this port changes. To configure the learning mode configuration, please refer to mac address-table max-mac-count. 125