TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 CLI Reference Guide Guide - Page 305

29.15 rmon statistics Description The rmon statistics command is used to configure the entries of SNMP-RMON statistics. To delete the corresponding entry, please use no rmon statistics command. The maximum supported entries are 1000. Syntax rmon statistics index interface gigabitEthernet port [ owner owner-name] [ status { underCreation | valid }] no rmon statistics index Parameter index -- The index number of the statistics entry, ranging from 1 to 65535, in the format of 1-3,5. port -- The statistics port number, in the format of 1/0/1. owner-name -- The creator of the event entry, ranging from 1 to 16 characters. By default, it is "monitor". status -- The status of the statistics entry, either "underCreation" or "valid". "underCreation" means this entry won't take effect until it is modified to "valid"; "valid" means this entry takes effect immediately after it is created. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the statistics entries 1-3 with the statistics port as 1/0/1, owner as owner1 and status as valid: T1600G-52TS(config)#rmon statistics 1-3 interface gigabitEthernet 1/0/1 owner owner1 status valid 29.16 show snmp-server Description The show snmp-server command is used to display SNMP configuration globally. 288