TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 CLI Reference Guide Guide - Page 280
ipv6 mld snooping max-groups
View all TP-Link T1600G-18TSTL-SG2216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
return to the default configuration, please use no ipv6 mld snooping querier vlan command. Syntax ipv6 mld snooping querier vlan vlan-id { query-interval interval | max-response-time response-time | general-query source-ip ip-addr } no ipv6 mld snooping querier vlan vlan-id { query-interval | max-response-time | general-query source-ip } Parameter vlan-id -- VLAN ID, ranging from 1 to 4094. interval -- The time interval to send a general query frame by MLD Snooping Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds. response-time -- The maximal time for the host to respond to a general query frame, ranging from 1 to 25 (Seconds). By default, it is 10 Seconds. ip-addr -- The source IP of the general query frame sent by MLD Snooping Querier. It should not be a multicast IP or a broadcast IP. By default, it is fe80::02ff:ffff:fe00:0001. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example For VLAN 2, specify its query-interval as 200 seconds, and the response-time as 20 seconds: T1600G-52TS(config)#ipv6 mld snooping querier vlan 2 query-interval 200 T1600G-52TS(config)#ipv6 mld snooping querier vlan 2 max-response-time 20 28.17 ipv6 mld snooping max-groups Description The ipv6 mld snooping max-groups command is used to configure the maximum number of groups that a port can join in. The ipv6 mld snooping max-groups action is used to configure the action that the port takes when it 263