TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 CLI Reference Guide Guide - Page 302

Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds for the entry 1-3: T1600G-52TS(config)# rmon history 1-3 interface gigabitEthernet 1/0/2 interval 100 owner owner1 29.13 rmon event Description The rmon event command is used to configure the entries of SNMP-RMON Event. To return to the default configuration, please use no rmon event command. Event Group, as one of the commonly used RMON Groups, is used to define RMON events. Alarms occur when an event is detected. Syntax rmon event index [ user user-name ] [ description descript ] [ type { none | log | notify | log-notify }] [ owner owner-name ] no rmon event index Parameter index -- The index number of the event entry, ranging from 1 to 12. You can only select one entry for each command. user-name -- The name of the User to which the event belongs, ranging from 1 to 16 characters. By default, it is "public". descript -- The description of the event, ranging from 1 to 16 characters. By default, it is empty. type -- The event type, with none, log, notify and both options. None indicates no processing, log indicates logging the event, notify indicates sending trap messages to the management station, and both indicates logging the event and sending trap messages to the management station. owner-name -- The owner of the event entry, ranging from 1 to 16 characters. By default, it is "monitor". 285