TP-Link T1600G-18TSTL-SG2216 T1600G-18TSUN V1 CLI Reference Guide Guide - Page 76

9.3 ip http max-users (For other switches) Description The ip http max-users command is used to configure the maximum number of users that are allowed to connect to the HTTP server. To cancel this limitation, please use no ip http max-users command. Syntax ip http max-users admin-num guest-num no ip http max-users Parameter admin-num -- The maximum number of the users logging on to the HTTP server as Admin, ranging from 1 to 16. The total number of Admin and Guest should be less than 16. guest-num -- The maximum number of the users logging on to the HTTP server as Guest, ranging from 0 to 15.The total number of Admin and Guest should be less than 16. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the maximum number of the Admin and Guest users logging on to the HTTP server as 5 and 3: T1600G-52TS(config)# ip http max-users 5 3 9.4 ip http session timeout Description The ip http session timeout command is used to configure the connection timeout of the HTTP server. To restore to the default timeout time, please use no ip http session timeout command. Syntax ip http session timeout time 59