Toshiba 36A40 Owners Manual - Page 36

Before Calling Service Personnel - parts

Page 36 highlights

Set up Preparation Reference Section Advanced Operation Basic Operation Before Calling Service Personnel Before calling service personnel, please check the following chart for a possible cause of the problem you are experiencing. A minor adjustment on your part may eliminate the problem and restore your TV reception. Problem TV will not turn on No picture, no sound No sound, picture OK Poor sound, picture OK Poor picture, sound OK Poor reception of broadcast channels No UHF, VHF OK Black box appears on the screen Cannot select a certain channel Multiple images (ghosts) Poor color or no color No stereo or SAP sound from an MTS broadcast The Remote Control does not operate Checks and Adjustments G Make sure the power cord is plugged in, then press POWER button. G Check battery in the Remote. (Maybe batteries are "dead".) G Check antenna/cable connections. G Maybe sound is muted. Try pressing VOLUME S button. G Try another channel. (Maybe station trouble.) G Try another channel. (Maybe station trouble or local interference from appliance.) G Check antenna/cable connections. G Try another channel. (Maybe station trouble or local interference.) G Adjust Picture menu. G Try another channel. G Check antenna connections. G If using VCR, check TV/VCR button. G Make sure TV/CABLE function is in "TV" mode. G Text may be turned on G That channel may be locked out with BLOCK CHANNEL function, or erased with the ADD/ERASE function. G Try another channel. (Maybe station trouble.) G Use a highly directional outdoor antenna. G Try another channel. (Maybe station trouble or local interference.) G Adjust TINT and/or COLOR in the Picture menu. G If you change the direction of the TV while the TV is activated, the picture may suffer from color shading. If so, turn off the TV and allow it to cool for about 30 minutes, then turn on the TV again. The picture should improve. G Check if MTS function is properly set. Page 15 8 5 15 20 5 10 16 29 33 17 20 24 G Check if TV/CABLE/VCR switch is properly set. G Maybe something was between the Remote and the remote sensor. G Maybe batteries are dead. Try replacing batteries with new ones. 9, 10 8 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38

36
Set up
Preparation
Basic Operation
Advanced Operation
Reference Section
Before Calling Service Personnel
Problem
Checks and Adjustments
Page
TV will not turn on
Make sure the power cord is plugged in, then press
POWER
button.
15
Check battery in the Remote. (Maybe batteries are
dead
.)
8
No picture, no sound
Check antenna/cable connections.
5
No sound, picture OK
Maybe sound is muted. Try pressing
VOLUME
S
button.
15
Try another channel. (Maybe station trouble.)
Poor sound, picture OK
Try another channel. (Maybe station trouble or local interference
from appliance.)
Poor picture, sound OK
Check antenna/cable connections.
Try another channel. (Maybe station trouble or local interference.)
Adjust Picture menu.
20
Poor reception of broadcast channels
Try another channel.
Check antenna connections.
5
If using VCR, check TV/VCR button.
10
No UHF, VHF OK
Make sure TV/CABLE function is in
TV
mode.
16
Black box appears on the screen
Text may be turned on
29
Cannot select a certain channel
That channel may be locked out with BLOCK CHANNEL function, or
33
erased with the ADD/ERASE function.
17
Multiple images (ghosts)
Try another channel. (Maybe station trouble.)
Use a highly directional outdoor antenna.
Poor color or no color
Try another channel. (Maybe station trouble or local interference.)
Adjust TINT and/or COLOR in the Picture menu.
20
If you change the direction of the TV while the TV is activated, the
picture may suffer from color shading. If so, turn off the TV and allow
it to cool for about 30 minutes, then turn on the TV again.
The picture should improve.
No stereo or SAP sound from an MTS
Check if MTS function is properly set.
24
broadcast
The Remote Control does not operate
Check if
TV/CABLE/VCR
switch is properly set.
9, 10
Maybe something was between the Remote and the remote sensor.
Maybe batteries are dead. Try replacing batteries with new ones.
8
Before calling service personnel, please check the following chart for a possible cause of the problem you are experiencing. A
minor adjustment on your part may eliminate the problem and restore your TV reception.
Reference Section