Toshiba DKT3010-SD User Guide - Page 106
Initializing the IPT1020-SD, IPT-to-IP Network Connection Instructions - instruction manual
View all Toshiba DKT3010-SD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
IPT1020-SD Settings Initializing the IPT1020-SD Initializing the IPT1020-SD CAUTION! If you initialize the IP telephone, all settings return to default. 1. Press ++++ROG (simultaneously). 2. Press 9RO L. 3. Press )% to initialize the telephone's function settings (LED On = initialize, LED Off = don't initialize). See "IPT1020-SD Function Settings" on page 95 for details. 4. Press )% to initialize LCD contrast setting (LED On = initialize, LED OFF = don't initialize). 5. Press )% to initialize the telephone's IP network connection settings (LED On = initialize, LED Off = don't initialize). See "IPT-to-IP Network Connection Instructions" below for details. 6. Press +ROG again to complete the initialization process. 7. Go off-hook and hang up. IPT-to-IP Network Connection Instructions 1. Press ++++ROG (simultaneously). 2. Press , then press +ROG to select the Network Setting Mode. 3. Press )% to see if the DHCP server is in use or not. Press one of the following (normally, use : manual setting): : manual setting, then press +ROG. : auto setting by DHCP server, then press +ROG. 4. Press )%. Enter the IP address for this IPT and press +ROG. To enter the period in an IP address, press the button on your dialpad (e.g., if the IP address is "192.168.1.241," press 5. Press )%. Enter the subnet mask number and press +ROG. (e.g., if the subnet mask address is "255.255.255.0, press 92 Strata CTX DKT/IPT Telephone 06/03