Toshiba Portege R100 Memory Replacement Guide - Page 9

Memory Module Replacement Guide Chapter 3 Replacing the memory module This chapter explains how to replace the memory module(s). ■ The replacement procedure depends on the model of the computer. Check your model and refer to the instructions for that model. ■ Most computers have two memory slots. Be sure to remove the affected memory module(s) before installing the replacement(s). The illustrations below may only show one memory module being replaced. If both modules are affected, the procedure must be repeated for each affected module. 1. Removing the memory module cover 1. Remove or loosen the screws securing the memory module cover. 2. Lift off the cover. Use a size 0 Phillips screwdriver. For the following models: ■ TECRA S1 ■ TECRA 9100 ■ TECRA M1 ■ TECRA M2 ■ Satellite 2400 ■ Satellite 2405 ■ Satellite 1110/1115 ■ Satellite Pro M10 ■ Satellite Pro M15 ■ Satellite M30/M35 ■ Portégé R100 ■ Portégé M200/M205 ■ Do not touch the connectors on the memory module or on the computer. Contamination on the connectors may cause memory failures. ■ Do not leave foreign objects or dropped screws in the computer. User's Manual 3-1