Toshiba S20-Silver User Manual - Page 10
Getting Started, Loading the Battery, Inserting and Removing an SD Card (Optional)
View all Toshiba S20-Silver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Loading the Battery Before using the camcorder, users must load the Lithiumion rechargeable battery come within the package. 1. Insert the battery according to the correct polarity marks (+ or -). 2. Close the battery cover firmly. Section 2 Getting Started Note Please remove the insulator on battery connection before use. Inserting and Removing an SD Card (Optional) The camcorder comes with an internal memory which allows you to store pictures and movies. You can expand the memory capacity by using an optional SD/SDHC memory card. 1. Insert the memory card into the slot. Please refer to the figure on the right side. 2. To remove an installed SD card, press the card inwards to release it. 3. When the card pops out, gently remove it from its slot. 4. Recommended memory capacity: 1GB or above. Note • When a memory card is fitted, movies/pictures are saved on the card rather than on the builtin memory. • Protecting Data on an SD Card: SD Card is read-only when it is locked. No pictures or movies can be recorded when the SD card is locked. Make sure the lock is on the writeable position before recording any media. Writeable position Write-Protected Position EN 10