Toshiba TLP710 Owners Manual - Page 17
Installation
UPC - 022265950128
View all Toshiba TLP710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
INSTALLATION Connect the power cord. • Insert one end in the AC IN socket on the rear panel. • Insert the other end in a wall outlet. 111) (0- P/ To a wall outlet. ON indicator (orange) lights and turn to standby mode. A Take off the lens cover. How to use the foot adjusters The tilt of the projector can be adjusted using the foot adjusters. 1 Lift the front of the projector until a tilt angle desired is obtained and pull up the foot adjuster release lever. Foot adjuster will stretch. Release the lever to lock in position. Foot adjuster release lever Foot adjuster release lever 4 Foot adjuster Side view Foot adjuster release lever 11; I, 4 Foot adjuster 2 Turn the foot adjuster to make fine adjustment of the height. Turn clockwise to lift up. Turn counterclockwise to lower. ( IIIIIIIIIIII Lift up -D Lower Lift up Lower 3 To put the foot adjuster back, hold down the foot adjuster release lever and lower the front slowly. The foot adjuster will put back. 4 Foot adjuster-- _ Foot adjuster release lever rt t) release lever a • To not pinch your fingers, when pulling up the foot adjuster release lever, always hold both sides of the unit. • If the screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light with curtains or other means. • If the screen and the projector are not installed properly the projected picture may be distorted. • If the projector is tilted, the picture may be distorted. To obtain the best possible picture, place the projector so it faces the screen squarely. 16