Toshiba TLP710 Owners Manual - Page 34
Projecting, Images, Document, Imaging, Camera, Continued
UPC - 022265950128
View all Toshiba TLP710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
CAMERA PROJECTINGIMAGESWITHTHEDOCUMENT IMAGINGCAMERA(CONTINUED) WHITEBALANCELOCK indicator 7 10 WHITE 7 8 9 BALANCE 8, 9 Projecting Images with the Document Imaging Camera (Continued) CAMERA Select "Camera" by pressing CAMERA. CAMERA You can switch to camera input by pressing the CAMERA button of the camera control panel or the INPUT button of the main unit. Anm LIGHT When finished, turn off the fluorescent light, and return the camera and arm to the original position. Follow steps 1 to 4 in inverse. Set the camera head on it's original position. Lay down the arm while pressing the button on the base of the arm. If the button is hard to press, slightly move the arm up and down to press the button. FOCUSA FOCUS, O Press FOCUS A and FOCUS • to focus. First enlarge the picture to the maximum using the ZOOM T button, and adjust the focus. The FOCUS buttons on the camera control panel are available as well. First, adjust the focus of the main unit. 18 ZOOM T ZOOM N EXIT ENTER1 Press ZOOM T and ZOOM W to adjust the size of the picture. The ZOOM buttons on the camera control panel are available as well. Press this button Put back with arm and head section aligned. Locking the white balance This camera is always adjusting the color balance when set to AUTO. If the color balance is not shown properly, follow the steps below to lock the white balance. 1 Place a white paper and enlarge it to the size of the screen. 2 Light the LOCK indicator by pressing the WHITE BALANCE button. To return to AUTO mode, press again the WHITE BALANCE button. The LOCK indicator will turn off. • When the arm is not raised up, the picture from the "Camera" input is not projected. • Connecting a capture card to the CAMERA OUT jack, you can export pictures on the document imaging camera to a computer. • When the arm is raised with the camera input selected, the color of the camera picture will vary for an instant period due to the white balance function worked, but this is normal not a failure. • When the arm is laid down and raised again, signals obtained from the CAMERA OUT jack may disturb. In this case, raise the arm again. • When the arm is laid down and raised again with the white balance locked (lock indicator ON), the indicator is kept ON, but the white balance lock is released. In this case, pressing the white balance button again returns the lock indicator to the normal status. 33