Toshiba Tecra 9000 User Guide - Page 67

Connecting Other External Devices Adding memory 67 Adding memory HINT: To purchase additional memory modules, see the accessories information packaged with your system or visit www.toshibaaccessories.com. Your Tecra® 9000 Series computer is equipped with a 133 MHz Front Side Bus (FSB) SDRAM memory module. The two memory slots in this computer provide various memory configurations. When additional memory is added, or original memory replaced, it is recommended that you use only compatible 133 MHz memory. In the event original memory is replaced with invalid memory, such as 66 MHz, the system will beep and will not boot beyond the BIOS memory check. A message may display. If this occurs, contact Toshiba's support center at (800) 457-7777. Since your computer was built to order, it should have enough memory to run your current applications. However, if your requirements change, you can install extra memory up to a maximum of 1024 MB (1 GB). NOTE: Windows® 98SE only supports a maximum memory capacity of 512 MB. Memory module sizes Additional memory is easy to install. Memory modules come in the following sizes: ❖ 128 MB PC133 SDRAM ❖ 256 MB PC133 SDRAM ❖ 512 MB PC133 SDRAM