Uniden DCT5285 English Owners Manual

Uniden DCT5285 Manual

Get Uniden DCT5285 PDF manuals and user guides View all Uniden DCT5285 manuals
Add to My Manuals
Save this manual to your list of manuals

Uniden DCT5285 manual content summary:

  • Uniden DCT5285 | English Owners Manual - Page 1
  • Uniden DCT5285 | English Owners Manual - Page 2
  • Uniden DCT5285 | English Owners Manual - Page 3
    w w w. u n i d e n . c o m
  • Uniden DCT5285 | English Owners Manual - Page 4
    GUIDE 5 Phone Phone 12 THE INTEGRATED ANSWERING DEVICE 50 Mounting the Base Unit on a Wall 16 Turning the Answering System On/Off 51 DCT5285 PHONE 64 Making and Receiving Calls 31 Connecting the Charger 64 Placing a Call on Hold 32 Register the Handset Information TROUBLESHOOTING 37
  • Uniden DCT5285 | English Owners Manual - Page 5
    on your purchase of the Uniden DCT5285 series Multi Handset Cordless System telephone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 4-way
  • Uniden DCT5285 | English Owners Manual - Page 6
    frequencies within the 2.4GHz bandwidth, this cordless phone helps reduce the possibility of eavesdropping. DirectLinkTM Mode is used when you have 2 or more handsets. You can use your handsets as transceivers. Be sure to visit our web site: www.uniden.com Uniden® is a registered trademark of
  • Uniden DCT5285 | English Owners Manual - Page 7
    PHONE LINE When the handset batteries are fully charged, plug the telephone cord into the base unit and then into a telephone wall jack. Install the batteries supplied with your phone, observing the correct polarity. Replace , press greeting or . QUICK REFERENCE GUIDE [ 5 ] QUICK REFERENCE
  • Uniden DCT5285 | English Owners Manual - Page 8
    and Functions 1 6 2 3 7 4 8 12 13 9 14 15 5 16 10 17 11 18 19 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands Free Speaker 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 9. Talk/flash Key 10. /tone/t Key 11. Speaker Key 12
  • Uniden DCT5285 | English Owners Manual - Page 9
    LED 46 47 48 (DCT5285-2 only) 50 49 43. Ringer/vol (volume) L (up) Key 44. Ringer/vol (volume) M (down) Key 45. Microphone 46. Telephone Input 47. DC Power Input 48. Charging Contacts (DCT5285-2 only) 49. Charge LED (DCT5285-2 only) 50. DC Power Input (DCT5285-2 only) CONTROLS AND FUNCTIONS
  • Uniden DCT5285 | English Owners Manual - Page 10
    .) ICON STATUS Standby/Talk DESCRIPTION Battery icons indicate the handset battery status. This icon cycles depending on the battery status (empty, low, medium, and full). indicates that the batteries installed are not for use with this phone, remove the batteries immediately. Standby Ringer off
  • Uniden DCT5285 | English Owners Manual - Page 11
    options - Access Caller ID messages stored - Store or edit phone numbers - Redial one of the last three numbers dialed from the handset - Etc.... Note: The soft keys will not appear while charging the handset. Terminology Throughout this manual, terms such as Standby and Talk Mode are used. Below
  • Uniden DCT5285 | English Owners Manual - Page 12
    this First This cordless telephone must be set up before use. Follow these steps: Step 1 (page 11) Unpack the telephone and accessories. Step 2 (page 12) Next, choose the best location to set up the base unit. Step 3 (page 13 to 17) Then, insert the batteries into the handset. Connect the base
  • Uniden DCT5285 | English Owners Manual - Page 13
    • Long telephone cord (1) • Short telephone cord (1) • Beltclip [DCT5285 (1) / DCT5285-2 (2)] • Charger (1) [DCT5285-2 only] Also included: • This Owner's Manual • Other Printed Material * For operations and restrictions on using multi handsets, read "Expanding Your Phone" on page 64. Uniden Parts
  • Uniden DCT5285 | English Owners Manual - Page 14
    contact your telephone company or a qualified installer. Setting up the Phone Do the following steps: A. Choose the best location B. Install the AA batteries into the handset C. a central location Avoid personal computers Avoid other cordless telephones [ 12 ] G E T T I N G S T A R T E D
  • Uniden DCT5285 | English Owners Manual - Page 15
    performance and safety, use replacement batteries specifically matched for this phone, contact www.uniden.com. Using incorrect batteries could damage or limit the performance and could cause bodily injury. • Recharge your phone on a regular basis by returning the handset to the cradle after each
  • Uniden DCT5285 | English Owners Manual - Page 16
    Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on both the handset and the go back over the charging contacts with a dry cloth before contacts returning the handset to the base to charge. C. Connect the base unit 1) Install the
  • Uniden DCT5285 | English Owners Manual - Page 17
    the AC adapter easily. • While charging, all handset keys will be disabled. • After installing the batteries in the handset, charge your handset at least 17-20 hours before plugging into the phone line. 5)Once the batteries are fully charged, connect the telephone line cord to the TEL LINE jack and
  • Uniden DCT5285 | English Owners Manual - Page 18
    Do not use an outlet controlled by a wall switch. Mounting the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1) Snap the desk top/wall mount adapter into the notches on the base bottom. 2) Plug the AC adapter to the DC IN 9V
  • Uniden DCT5285 | English Owners Manual - Page 19
    when inserting screws into the wall. • Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (minimum length of 1-3/8 inches) with anchoring
  • Uniden DCT5285 | English Owners Manual - Page 20
    DCT5285 Flow Chart • From the standby mode L Caller ID CID SUN 12:00A or M R e d i a l H i s t o r y RDL Handset #1 Phonebook PB New: 5 Talk ENTER soft key Anykey Answer Banner SUN 12:00A Language Handset #1 Contrast DirectLink Mode BACK OK CANCEL DirectLink DirectLink soft key
  • Uniden DCT5285 | English Owners Manual - Page 21
    From the Talk mode M DirectLink Mode M Handset Setup Handset Setup Answ. Setup Answ. Setup Global Setup Talk 999:59 1234567890 MUTE MENU CWDX OK soft key L or M Deregister HS Replacing Base BACK BACK OK OK soft key Setup the menu (see page 30). • Press the MUTE
  • Uniden DCT5285 | English Owners Manual - Page 22
    the DirectLink mode first (see page 24). This menu only applies when you have 2 or more handsets. Handset Setup All settings must be set separately for each handset in the Handset Setup menu. Submenu name Ringer Volume Ringer Tones Distinct. Ring (Distinctive ring) Description Adjust the ringer
  • Uniden DCT5285 | English Owners Manual - Page 23
    without pressing talk/flash or speaker. When the AutoTalk is set to On, simply remove the handset from the cradle and the phone automatically answers the call (see page 25). Allows you to answer the phone without pressing talk/flash or speaker. When the Anykey Answer is On, you can answer a call
  • Uniden DCT5285 | English Owners Manual - Page 24
    Base Description Clear the handset ID from the base. Use this menu, for example when you change the digital security code (see page 30). Clear the base ID. Use this menu, for example, if you replace the base with a different base of the DCT series model (DCT5260/DCT5280/DCT5285) (see page 30
  • Uniden DCT5285 | English Owners Manual - Page 25
    return to the previous screen, press the BACK soft key. For detailed instructions, see the following sections for the desired submenu. 5) To exit speaker. - Charge the handset. - Receive an outside/intercom call. • If the handset remains idle for 30 seconds, the phone will return to the standby
  • Uniden DCT5285 | English Owners Manual - Page 26
    the normal mode, exit the DirectLink mode. To exit the DirectLink mode, press the CANCEL soft key, then the OK soft key, or return the handset to the cradle. • If you select "Ringer Volume Off", icon appears in the display. • If you press volume/L in Ringer Volume High or volume/M in
  • Uniden DCT5285 | English Owners Manual - Page 27
    or "Off". Distinctive Ring On Off BACK BACK OK 3) Press the OK soft key. You will hear a confirmation tone. Setting the AutoTalk 1) Enter the "Handset Setup" menu, then the "Auto Talk" submenu (see "Entering the Menu" on page 23). 2) Press volume/ L or M to change the selection, "On" or "Off
  • Uniden DCT5285 | English Owners Manual - Page 28
    If you don't enter a banner, the phone will use the handset ID for the banner (for example Handset #1). Setting the Anykey Answer 1) Enter the "Handset Setup" menu, then the "Anykey Answer" submenu (see "Entering the Menu" on page 23). 2) Press volume/ L or M to change the selection, "On" or "Off".
  • Uniden DCT5285 | English Owners Manual - Page 29
    GETTING STARTED Answering System Setup Setting a PIN Code 1) Enter the "Answ. Setup" menu, then the "Security Code" submenu (see "Entering the Menu" on page 23). 2) Enter a two-digit PIN code (01-99) using the number keypad (0-9). 3) Press the OK soft key. You will hear a confirmation tone.
  • Uniden DCT5285 | English Owners Manual - Page 30
    Setting the Message Alert On or Off 1) Enter the "Answ. Setup" menu, then the "Message Alert" submenu (see "Entering the Menu" on page 23). 2) Press volume/ L or M to choose "On" or "Off". 3) Press the OK soft key. You will hear a confirmation tone. Message Alert On Off BACK BACK OK Setting
  • Uniden DCT5285 | English Owners Manual - Page 31
    number keys to enter the new area code. • You can set the clock either by the handset or base (see "Setting the time" on page 54). • When a Global setting is changed from one handset, this affects all registered handsets. • For setting the day and time, the idle time-out is extended to 2 minutes
  • Uniden DCT5285 | English Owners Manual - Page 32
    . 3) Press the OK soft key. You will hear a confirmation tone. Which Handset? Handset #1 Handset #2 BACK BACK OK When de-registration is complete, "Deregistration Complete" appears. 4) After de-registering the handset, move to "Replacing the Base Setting" below. Are you sure to deregister
  • Uniden DCT5285 | English Owners Manual - Page 33
    tone. 2) Listen for the dial tone. 3) Dial the number. 3) Dial the number. OR Dial the number, then press speaker. Press end, or return the handset to the cradle (AutoStandby). Press (talk). When you dial the number in the standby mode, press the PAUSE soft key. "P" appears in the display
  • Uniden DCT5285 | English Owners Manual - Page 34
    , the call will be put on hold. 2) To talk to the caller, press talk/flash or speaker on a handset (or (talk) on the base). The phone will return back to the call. Line On Hold Handset #1 New: 1 MENU CID RDL PB • You can hold a call for 5 minutes, when 5 minutes has passed, the call
  • Uniden DCT5285 | English Owners Manual - Page 35
    Delete Redial1? Yes No BACK BACK OK BASICS Ringer Mute (temporarily) You can temporarily mute the handset and the base ringer tone. To mute the handset ringer tone, when the handset is off the cradle and the phone is ringing, press the MUTE soft key. To mute the base ringer tone, press on the
  • Uniden DCT5285 | English Owners Manual - Page 36
    the end key to cancel muting, the call is disconnected and the phone will return to the standby mode. • The tone feature only applies when MENU With the handset You can temporarily turn Off the microphone so that the person you are talking with cannot hear you. During a telephone call, press the
  • Uniden DCT5285 | English Owners Manual - Page 37
    while using your phone, you can manually improve the sound quality for clear operation. This works only when the phone is in use. charged batteries. BASICS 3-Way Conferencing The phone permits 3-way conversations between the handset, base, and an outside line. When speaking on the handset 1)
  • Uniden DCT5285 | English Owners Manual - Page 38
    to initiate the 3-way conversation. 2) To hang up, return the handset to the cradle, or press the end key on the handset. The base will still be connected to the call. If you purchase a DCX520 extra handset, the phone permits 4-way conversation, see "4-way Conferencing" on page 66 for details
  • Uniden DCT5285 | English Owners Manual - Page 39
    ) (during a call or when the line is in use). • If the handset remains idle for 30 seconds, the phone will return to the standby mode (or back to the call). Storing Phone Numbers, Names, Distinctive Rings, and Speed Dial 1) When the phone is in the standby mode, press the CID RDL PB soft key
  • Uniden DCT5285 | English Owners Manual - Page 40
    Name OK 5) Press the OK soft key to store the name, "Store/Edit No." appears. Store/Edit 8007303456 6) Press the number keypad to enter the phone number (up to 20 digits), press the OK soft key to store the number. DELETE PAUSE No. OK 7) "Distinctive Ring" appears. Press volume/ L or M to
  • Uniden DCT5285 | English Owners Manual - Page 41
    Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a number key (0-9), the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number
  • Uniden DCT5285 | English Owners Manual - Page 42
    , to enter Movies: 1) When the phone is in the standby mode, recall the "Phonebook" menu by following steps 1-2 in "Storing Phone Numbers, Names, Distinctive Rings, and Speed , press the OK soft key. To continue to store the telephone number, proceed to step 6 on page 38. [ 40 ] P H O N E B O O K
  • Uniden DCT5285 | English Owners Manual - Page 43
    names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. 1) Press the CID RDL PB soft key (or the MENU soft key during a call). 2) Press volume/ L or M to move the pointer to "
  • Uniden DCT5285 | English Owners Manual - Page 44
    the DIAL soft key. The number in the displayed phonebook location is dialed. 4) To hang up press the end key. Speed Dialing If you store a phone number in a speed dial memory location (10 locations: SPD1 SPD0), you can use the speed dialing feature. When the
  • Uniden DCT5285 | English Owners Manual - Page 45
    Distinctive Ring, and Speed Dial 1) When the phone is in the standby mode, press the "Store/Edit Name" appears. M o v i e s 2) Follow the steps 4 to 8 under "Storing Phone Numbers, Names, Distinctive Rings, and Speed Dial" BACK DELETE OK on page 38 to complete the editing operation. Delete
  • Uniden DCT5285 | English Owners Manual - Page 46
    call, the operation is canceled. The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up number. Store a special number in the phonebook location (refer to "Storing Phone Numbers, Names, Distinctive Rings and Speed Dial" on page 37). Once you
  • Uniden DCT5285 | English Owners Manual - Page 47
    or when the line is in use). -Charge the handset. • If the handset remains idle for 30 seconds, the phone will return to the standby mode (or back to the When the call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name does not appear. (This
  • Uniden DCT5285 | English Owners Manual - Page 48
    same Caller ID appears next to the received time. Once you have reviewed the new message, the number will be cleared and disappears. • During Dials) in total. You can view the Caller ID list during a call or when the phone is in the standby mode. 1) Press the CID RDL PB soft key in the standby mode
  • Uniden DCT5285 | English Owners Manual - Page 49
    will hear a confirmation tone. Once the Caller ID data has been deleted, the information cannot be retrieved. Deleting all Caller ID names/numbers 1) When the phone is in the standby mode, press the CID RDL PB soft key. 2) Press volume/ L or M to move the pointer to "Caller ID", then press the
  • Uniden DCT5285 | English Owners Manual - Page 50
    make a call from the Caller ID list if your phone is connected to a private branch exchange (PBX). • When a long distance call has been set, "1" appears in the display. • If a call comes in via a telephone system that does not offer Caller ID service, no information is stored. • If the Caller ID
  • Uniden DCT5285 | English Owners Manual - Page 51
    service, or conference them into your current call. You may be required to subscribe to Call Waiting and Call Waiting Deluxe to use these features. Not all features are available in all areas. Check with your local telephone returns back to the call. Your phone is pre-programmed with seven call
  • Uniden DCT5285 | English Owners Manual - Page 52
    you're away from your phone. Features • Digital Tapeless Recording • Remote Operation from the Handset • Approx. 12 Minutes of Digital Tapeless Recording allows you to quickly review, save, or delete the messages please read through all of the instructions carefully. [ 50 ] T H E I N T E G R A T
  • Uniden DCT5285 | English Owners Manual - Page 53
    be illuminated. You can also turn the Answering System On or Off from the handset using the menu mode (see page 28). Setting up your Answering System • When 30 seconds long (must be more than 2 seconds long). 1) When the phone is in the standby mode, press and hold greeting. 2) Start your recording
  • Uniden DCT5285 | English Owners Manual - Page 54
    ringer volume You have four ringer volume options. One allows you to turn the base ringer off. The other three are volume levels. 1) When the phone is in the standby mode, press ringer/vol L or M. You hear the ringer at the current volume level (" " High, " " Medium, " " Low, or " " Off) (if you
  • Uniden DCT5285 | English Owners Manual - Page 55
    move to the next menu option. CLOCK/MENU • You can also set these menus from the handset. See "Answering System setup" on page 27 for instructions. CLOCK/MENU For your convenience, voice prompts will guide you through the menu setup mode. • If you press ringer/vol L in the maximum volume level
  • Uniden DCT5285 | English Owners Manual - Page 56
    displays " " or " ". 9) Press SET to select the AM/PM setting. A confirmation tone sounds, the day and time you set are announced for your review. Setting a PIN code To play your messages from a remote location, you will need to enter a two-digit Personal Identification Number (PIN) code ( - ). To
  • Uniden DCT5285 | English Owners Manual - Page 57
    THE INTEGRATED ANSWERING DEVICE Setting the ring time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. Setting "TS" (Toll Saver), the answering
  • Uniden DCT5285 | English Owners Manual - Page 58
    press any key on the base unit and the tone will automatically deactivate. Turning the message alert tone Off when you are away from your phone When all new messages are played back using the remote playback feature (see pages 6163) the Message Alert will automatically deactivate. The tone will not
  • Uniden DCT5285 | English Owners Manual - Page 59
    you hear the calls as the machine records the message. 2) To answer the call, press (talk) or pick up the handset from the base (when AutoTalk is set to On). If the handset is away from the base, press talk/flash, speaker or any number key, /tone, or # (when AutoTalk is set
  • Uniden DCT5285 | English Owners Manual - Page 60
    you can then play your old messages. Playing your messages 1) When the phone is in the standby mode, press . The system announces the number of in the order in which they were received. Repeating a message 1) Press to review your messages. The number of stored messages is announced. 2) To repeat the
  • Uniden DCT5285 | English Owners Manual - Page 61
    To quickly scroll through a message, press and hold /SELECT. The system advances through the playback at double speed. 3) Press at anytime to stop reviewing your messages and return to standby. The message counter shows the number of messages stored in memory. Deleting a message To maintain maximum
  • Uniden DCT5285 | English Owners Manual - Page 62
    telephone conversation in order to determine that your use is in compliance with such laws or guidelines. Voice memo The voice memo function allows the user record a conversation from the handset or the base (more than During a conversation using the base speaker phone, press and hold memo rec on the
  • Uniden DCT5285 | English Owners Manual - Page 63
    THE INTEGRATED ANSWERING DEVICE Remote Operation You can operate your answering system from a remote location using any touch-tone telephone or the handset. Remote access away from home You can check, play, or delete messages, even record a new greeting message when you are away from home.
  • Uniden DCT5285 | English Owners Manual - Page 64
    does not answer within 6 seconds, you hear a beep and the phone will return to standby. • The base's keypad is disabled during remote operation. • When you receive a call, the remote operation is canceled. • You can change the handset volume during a remote operation. • During the remote operation
  • Uniden DCT5285 | English Owners Manual - Page 65
    1) When the phone is in the standby mode, press the soft key on the handset. "Remote Playback" appears on the handset display. The answering and old messages, only the new messages will be played. After you have reviewed your new messages, you can play your old messages by again pressing the soft
  • Uniden DCT5285 | English Owners Manual - Page 66
    to the DCT5285 series base. • Save this manual for the detailed operation. • All of the handsets ring when a call is received. Expanding Your Phone Your phone supports up to 4 handsets (including the handset(s) supplied with your phone). You can now place a fully featured cordless handset anywhere
  • Uniden DCT5285 | English Owners Manual - Page 67
    at the factory, which has #1 (#1 and #2 for DCT5285-2) in the display. When you register additional handsets to the base, the handset ID will be assigned. 1) Before registering the extra handset, charge the phone's battery for 10 minutes. 2) Place the extra handset in the main base unit to begin
  • Uniden DCT5285 | English Owners Manual - Page 68
    DirectLink call 1) When the phone is in the DirectLink standby mode, press the DirectLink soft key. (Example of DirectLink from handset #1). 2) Select the party by pressing the number keys (1 - 4). Your handset will page the other handset. 3) On the receiving handset, press talk or the ANSWER soft
  • Uniden DCT5285 | English Owners Manual - Page 69
    Intercom/Call Transfer Feature Intercom and Call Transfer features are available for your phone. • If the party is busy or out of range, you will hear a beep and the handset returns to the standby mode. • If any of the following occurs, the operation will be canceled. - Press talk/flash or speaker
  • Uniden DCT5285 | English Owners Manual - Page 70
    to the caller, press talk/flash or speaker on the receiving handset. Replacing the Base [ 68 ] When you replace the base with a different base of the DCT series model (DCT5260, DCT5280, or DCT5285 series), you need to clear the handset and base ID. To do this, perform the "System Reset" menu
  • Uniden DCT5285 | English Owners Manual - Page 71
    situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: 1. Perform the "System Reset" menu options ("De-register the Handset" and "Replacing the Base Setting") for all the handsets you have. (See "System
  • Uniden DCT5285 | English Owners Manual - Page 72
    becomes short, even after a battery is recharged, please replace the battery. Please use only "AA" rechargeable Ni-MH batteries. Warning To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden adapter model specifically designated for this product
  • Uniden DCT5285 | English Owners Manual - Page 73
    the amount of time the handset is off the base. Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the batteries are recharged, please replace the batteries. A replacement Uniden adapter may be purchase
  • Uniden DCT5285 | English Owners Manual - Page 74
    Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom The charge LED won't illuminate when the handset is placed in the cradle. Suggestion • Make sure the AC adapter is plugged into the base (or the charger (for DCT5285-2 only)) and
  • Uniden DCT5285 | English Owners Manual - Page 75
    telephone company to verify your Caller ID service is current. You cannot register the handset at the base. • Please make sure your batteries are charged at least 10 minutes (see "Register the Handset" on page 65). • Remove the base ID (see "Replacing phone. • Make sure that the touch-tone phone
  • Uniden DCT5285 | English Owners Manual - Page 76
    (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base). Action handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please send to: Uniden America Corporation Parts and Service
  • Uniden DCT5285 | English Owners Manual - Page 77
    with this product only in accordance with the instructions and limitations specified in the owner¬s manual provided for this product. 6. Observe proper polarity orientation between the batteries and battery charger. SAVE THESE INSTRUCTIONS! Important Electrical Considerations Unplug all electrical
  • Uniden DCT5285 | English Owners Manual - Page 78
    to such actions to allow you time for making necessary arrangements to continue uninterrupted service. If you are having trouble with your telephone service, you must first disconnect your phone to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it
  • Uniden DCT5285 | English Owners Manual - Page 79
    the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the
  • Uniden DCT5285 | English Owners Manual - Page 80
    call 32 Register the handset 65 Remote access away from home 61 from your handset 62 Replacing the base 68 Ringer volume 24 S Setting up base unit 12 extra handset 64 handset 13 Soft key function 9 Speed dialing 42 T, U, V, W, X, Y, Z Transferring a call 68 Troubleshooting 72 Voice memo
  • Uniden DCT5285 | English Owners Manual - Page 81
    code. The answering system announces the number of messages stored in memory and the help guidance. 3. To quit, hang up the phone. Turn on the answering system remotely 1. Call your phone and let it ring 10 times until you hear a beep. 2. Press 0 and then enter your PIN code. 3. Press 0 then 5 to
  • Uniden DCT5285 | English Owners Manual - Page 82
    CUT Task Key Repeat a Message Playing incoming Messages Skipping a Message Deleting a Message Stop Operation Answering System On Memo Record/Stop Greeting Message Record/Stop Answer System Off Help Guidance [ 80 ] R E M O T E O P E R A T I O N C A R D
  • Uniden DCT5285 | English Owners Manual - Page 83
    with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Thank
  • Uniden DCT5285 | English Owners Manual - Page 84
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84