Uniden DCT5285 English Owners Manual - Page 67
Register the Handset, Using the DirectLink Mode
View all Uniden DCT5285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Register the Handset If you purchase an extra handset, you need to register the handset before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 (#1 and #2 for DCT5285-2) in the display. When you register additional handsets to the base, the handset ID will be assigned. 1) Before registering the extra handset, charge the phone's battery for 10 minutes. 2) Place the extra handset in the main base unit to begin registration. 3) While the handset is registering, "Handset Registering" will appear in the LCD. When "Registration Complete" is displayed, the handset has been registered to the base. If "Registration Failed" appears, please try these steps again. 4) Place the handset back in the charging cradle and fully charge the phone's battery for 17 to 20 hours. An extra handset can be registered when the base is in the standby mode. Using the DirectLink Mode To use this feature, you must enter the two handsets into the DirectLink mode first. To enter the DirectLink mode e See page 24 • During DirectLink Mode, batteries use time when fully charged is as follows: - Up to 7 hours continuous use. - Up to 24 hours in the standby mode. • Placing the handset in the cradle causes the handset to exit the DirectLink mode. EXPANDING YOUR PHONE E X PA N D I N G Y O U R P H O N E [ 65 ]