Uniden DCT5285 English Owners Manual - Page 54

• If an outside call is received during the operation, the operation is canceled. • If you press ringer/vol L in the maximum volume level (3) or ringer/vol M in the ringer off (0), you will hear a beep. Choosing between the two outgoing messages When the phone is in the standby mode, press greeting. Press greeting again when the outgoing message is played. Each time greeting is pressed, the outgoing message is switched between the pre-recorded and the personal outgoing message. Deleting an outgoing message To delete the personal outgoing message, press system announces "Greeting has been deleted". del while the message is playing. The Setting the base ringer volume You have four ringer volume options. One allows you to turn the base ringer off. The other three are volume levels. 1) When the phone is in the standby mode, press ringer/vol L or M. You hear the ringer at the current volume level (" " High, " " Medium, " " Low, or " " Off) (if you set the base ringer volume to off "Ringer Off" is announced), and it appears on the base. 2) Press ringer/vol L or M repeatedly until the desired ringer volume appears. You will hear a ringer at the selected volume level. The system returns to the standby mode. You can also set the base ringer volume or while the phone is ringing, press ringer/vol L or M repeatedly to select the desired ringer volume. [ 52 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E