Uniden DCT5285 English Owners Manual - Page 40

3) Press the STORE soft key, "Store/Edit Name" appears. • When the memory is full, you will hear a beep and "Memory Full" appears. You cannot store names and numbers. • The pause key counts as one digit. Pressing the PAUSE soft key more than once increases the length of the pause between numbers. Each pause replesents a 2 second delay. • Selecting a speed dial location where a number is already stored, releases the old number's speed dial setting. The new number will be stored in the speed dial location. 4) Enter the name (up to 16 characters) by using the number keypad (see the "Steps for Entering Names and Special characters" on page 39). If a name is not required, go to step 5. will be used as the name. Store/Edit Movies BACK DELETE Name OK 5) Press the OK soft key to store the name, "Store/Edit No." appears. Store/Edit 8007303456 6) Press the number keypad to enter the phone number (up to 20 digits), press the OK soft key to store the number. DELETE PAUSE No. OK 7) "Distinctive Ring" appears. Press volume/ L or M to move the pointer to one of the Distinctive Ring options, then press the OK soft key. If you choose not to store a "Distinctive Ring", simply select the "No Selectn" option. Distinctive Ring No Selectn Flicker BACK OK 8) "Speed Dial" appears. Press volume/ L or M to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). If you choose not to store the name/number as a Speed Dial, simply select the "No Selectn" option. 9) Press the OK soft key. You will hear a confirmation tone and "Done!" appears in the display. Speed Dial No Selectn SPD1: BACK OK Movies 800-730-3456 Flicker /SPD2 BACK DELETE EDIT [ 38 ] P H O N E B O O K