Uniden DCT5285 English Owners Manual - Page 36

• To adjust the base ringer or speaker volume, see page 52-53. • If you press the end key to cancel muting, the call is disconnected and the phone will return to the standby mode. • The tone feature only applies when the dial mode is set to pulse. • This special number can be stored in a memory location. This is referred to as Chain Dialing (see page 44.) [ 34 ] B A S I C S Adjusting the Earpiece and Handset Speaker Volume You can select different volume levels for the handset earpiece and the handset speaker (6 levels: Low to Max). The volume can only be adjusted during a call. Press volume/ L or M to select the volume settings. When you hang up, the phone keeps the last volume setting selected. Talk 0:15 - Volume + MUTE MENU If you press volume/ L in the maximum volume level or volume/ M in the lowest volume level, you will hear a beep. Talk 0:15 Mute Microphone - Volume + MUTE MENU With the handset You can temporarily turn Off the microphone so that the person you are talking with cannot hear you. During a telephone call, press the MUTE soft key to turn Off the microphone. "Mute" and appear in the display. Press the MUTE OFF soft key to cancel muting. With the base While using the base speakerphone, press mute on the base to turn Off the microphone. Press mute again, or press (talk) to cancel muting. Tone Dialing Switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. For example, entering your bank account number after you have called your bank. Initially make your call with the pulse dialing mode. Once your call connects, press /tone/t on the handset or base. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.