Uniden DCT5285 English Owners Manual - Page 19
Direct wall plate mounting
View all Uniden DCT5285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
GETTING STARTED Direct wall plate mounting If you don't have a standard wall plate, you can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset. • Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed. 1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screwheads for mounting the base. 2) Refer to steps 1 through 7 on page 16 to mount the base. G E T T I N G S T A R T E D [ 17 ]