Uniden MHS135DSC English Owner's Manual - Page 10

MenUs, OPeratiOn MODes

Page 10 highlights

Menu Option System What it does You can set system-wide features using the following settings: -- Lamp Adjust. This setting adjusts the brighness of the backlighting. -- Contrast/RVS. You can adjust the brightness of the screen contrast higher or lower. Once you get to the bottom limit of the contrast, selecting it again reverses the contrasts. -- Temperature. Your system can measure water temperature. This option lets you display the temperature in Farenheit or Celsius. Call Menu Press and hold MENU/CALL to set the technical requirements for DSC function operations through the Call menus. The menus are: Menu Option Individual Group All Ships POS Request What it does Sends an individual call to an individual station. Sends a call to a group. Sends URGENCY or SAFETY message to all ships. Requests the position of an individual vessel. Position Send Transmits your position to a vessel that was programmed into the DIRECTORY. Test Sends a test call. Standby Places the radio in an unattended mode. Receive Log Displays a list of all received calls to the radio. The MHS135DSC stores log data for 10 distress calls and 50 other calls. DSC Setup Allows the user to set up Digital Selective Calling (DSC) service. GPS/MEM Menus The Favorite menu lets you save and name sets of GPS coordinates so you can return to that location again. You can recall the saved GPS coordinates, too. Configure the GPS module through the GPS Setup menu. See page E-26 for details. Operation Modes Your radio has three main operation modes: Normal, Scan, and Weather. Mode What it does Normal Monitors a single marine channel and lets you talk on that channel. Scan Monitors all the channels you save into memory. Weather Monitors the selected NOAA weather channel. Use it when you want to... To turn it on/off Monitor a channel or talk to another radio. (default mode) Check a small group of regularly- Press and hold CLR/ used channels for traffic. SCAN for 2 sec. Hear the current or forecasted weather. Press WX/SOS E-6 Uniden MHS135DSC Radio Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

E-6
Uniden MHS135DSC Radio Owner’s Manual
Menu Option
What it does
System
You can set system-wide features using the following settings:
-
Lamp Adjust. This setting adjusts the brighness of the backlighting.
-
Contrast/RVS. You can adjust the brightness of the screen contrast higher or lower.
Once you get to the bottom limit of the contrast, selecting it again reverses the
contrasts.
-
Temperature. Your system can measure water temperature. This option lets you
display the temperature in Farenheit or Celsius.
Call Menu
Press and hold
MENU/CALL
to
set the technical requirements for DSC function
operations through the
Call
menus. The menus are:
Menu Option
What it does
Individual
Sends an individual call to an individual station.
Group
Sends a call to a group.
All Ships
Sends
URGENCY
or
SAFETY
message to all ships.
POS Request
Requests the position of an individual vessel.
Position Send
Transmits your position to a vessel that was programmed into the DIRECTORY.
Test
Sends a test call.
Standby
Places the radio in an unattended mode.
Receive Log
Displays a list of all received calls to the radio. The MHS135DSC stores log data
for 10 distress calls and 50 other calls.
DSC Setup
Allows the user to set up Digital Selective Calling (DSC) service.
GPS/MEM
MenUs
The
Favorite
menu lets you save and name sets of GPS coordinates so you can return
to that location again. You can recall the saved GPS coordinates, too. Configure the
GPS module through the
GPS Setup
menu. See page E-26 for details.
OPeratiOn MODes
Your radio has three main operation modes: Normal, Scan, and Weather.
Mode
What it does
Use it when you want to...
To turn it on/off
Normal
Monitors a single marine channel
and lets you talk on that channel.
Monitor a channel or talk to
another radio.
(default mode)
Scan
Monitors all the channels you save
into memory.
Check a small group of regularly-
used channels for traffic.
Press and hold
CLR/
SCAN
for 2 sec.
Weather
Monitors the selected NOAA
weather channel.
Hear the current or forecasted
weather.
Press
WX/SOS