Uniden MHS135DSC English Owner's Manual - Page 28

Acknowledging Test Call Receipt Different screens display depending on whether you set the Test Reply to Auto or Manual. If Test Reply is set to Auto: If Test Reply is set to Manual: Test 1234567890 06/20 11:00 Safety 18A USA Exit [CLR] Test 123456789 Reply 18A USA Send Exit [ENT] [CLR] No action is necessary. Select Send to send a reply. Position Request and Reply Enabling Automatic Position Reply If you want the radio to automatically transmit your current position whenever it receives a position request, you can enable automatic position reply. Most boaters activate automatic position reply for safety reasons or because they subscribe to a marine towing service. Sometimes-for example, in some competitive situations--you may not want other stations to get your position without your manual confirmation 1. Press and hold MENU/CALL to display the Call menu. 2. Select DSC Setup and then POS Reply. 3. Choose Auto and press ENTER-H/M/L. The radio will automatically transmit your position when it receives a position request. 4. To disable automatic position reply, repeat the steps above and select Manual. POS Request Any time you need to know where another boat currently is-to find your boating partners, to respond to a request for assistance, etc.-you can send a position request to their radio: Press and hold POS Request POS Request [Manual] Norwester Harris 16 USA Back Select Exit [MENU] [ENT] [CLR] 1. Press and hold MENU/CALL to display the Call menu. 2. Select POS Request and press ENTER-H/M/L. 3. The radio displays the names listed in your directory; use CHANNEL UP and CHANNEL DOWN to choose the directory entry you want to contact and press ENTER-H/M/L. If you want to contact a station that is not in your directory, select Manual. The radio prompts you to enter the MMSI number you want to call. Enter the MMSI number the same way you enter directory entries (see page 22). Enter all nine digits and press ENTER-H/M/L. E-24 Uniden MHS135DSC Radio Owner's Manual