Uniden MHS135DSC English Owner's Manual - Page 12

Normal mode with DSC Watch, Using the radio in scan mode, Scan mode with Weather Alert Watch, Scan

Page 12 highlights

until your transmission is finished and then checks the channels. Normal mode with DSC Watch Monitoring Channel 25 If you activate DSC Watch while operating in Normal mode, the radio checks channel 70 every few seconds. Scan 70 70 70 Every few seconds, the radio checks channel 70 with DSC Watch on You can save channels into memory and then use scan mode to monitor those channels from lowest to highest. If the radio detects a signal on a channel, it stays on that channel as long as the signal is received; when the signal stops, the radio continues scanning. When it detects a signal, the radio stays on the channel until you press the Channel Up button or the signal stops. 08 10 11 12 13 14 Resume scan 15 17 The radio scans about 5 channels in 0.5 seconds. Using the radio in scan mode xx To activate scan mode, press and hold CLR/SCAN. xx You must have at least two channels in memory to start a scan. xx You cannot transmit while in scan mode. xx To save a channel into memory, select the channel, then press and hold the GPS/ MEM button. The MEM icon displays whenever you tune to that channel. xx To remove a channel from memory, set the radio to that channel, then press and hold the GPS/MEM button. The MEM icon no longer displays. xx When the radio stays on a channel, press Channel Up to leave that channel and resume scanning. xx To end the scan, press and hold the CLR/SCAN button again; the radio remains on the last scanned channel. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while in scan mode, the radio checks the most recently-used weather channel every few seconds, then continues scanning the next channel in memory: Memory Channel Scan 08 10 11 12 13 14 15 17 20 24 25 Every few seconds, the radio checks the last-used weather channel, then scans the next channel. WX Alert Watch on wx Scan mode with Triple Watch or Dual Watch If you activate Triple Watch while operating in scan mode, the radio checks channels 16 and 9 every few seconds, then goes on to scan the next channel; with Dual Watch E-8 Uniden MHS135DSC Radio Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

E-8
Uniden MHS135DSC Radio Owner’s Manual
until your transmission is finished and then checks the channels.
Normal mode with DSC Watch
If you activate DSC Watch while operating in
Normal
mode, the radio checks channel 70
every few seconds.
Scan
You can save channels into memory and then use scan mode to monitor those channels
from lowest to highest. If the radio detects a signal on a channel, it stays on that channel
as long as the signal is received; when the signal stops, the radio continues scanning.
Using the radio in scan mode
x
To activate scan mode, press and hold
CLR/SCAN
.
x
You must have at least two channels in memory to start a scan.
x
You cannot transmit while in scan mode.
x
To save a channel into memory, select the channel, then press and hold the
GPS/
MEM
button. The
MEM
icon displays whenever you tune to that channel.
x
To remove a channel from memory, set the radio to that channel, then press and
hold the
GPS/MEM
button. The
MEM
icon no longer displays.
x
When the radio stays on a channel, press
Channel Up
to leave that channel and
resume scanning.
x
To end the scan, press and hold the
CLR/SCAN
button again; the radio remains on
the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in scan mode, the radio checks the most
recently-used weather channel every few seconds, then continues scanning the next
channel in memory:
Scan mode with Triple Watch or Dual Watch
If you activate Triple Watch while operating in scan mode, the radio checks channels 16
and 9 every few seconds, then goes on to scan the next channel; with Dual Watch
70
Every few seconds, the radio
checks channel 70
with DSC Watch on
70
70
Monitoring Channel 25
11
10
08
13
12
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio stays
on the channel until you press the
Channel Up
button or the signal stops.
Resume
scan
Every few seconds, the radio
checks the last-used weather
channel, then scans the next
channel.
wx
WX Alert
Watch on
Memory Channel Scan
08
25
24
17
15
14
13
12
11
10
20