Uniden MHS135DSC English Owner's Manual - Page 2
Making a Distress Call
View all Uniden MHS135DSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Making a Distress Call Lift the red cover. Press and hold the DISTRESS button for three seconds. Your radio transmits your boat's location every few minutes until you receive a response. ## NOTE: If the radio displays Enter User MMSI, cancel the automatic distress call and make a normal voice distress call. Making a Voice Distress Call Speak slowly - clearly - calmly. For future reference, write your boat's name & call sign here: Lift the red cover and press the red DISTRESS button underneath. 1. Make sure your radio is on. 2. On the microphone, press the 16/9-TRI button to switch to Channel 16 (156.8 MHz). (If the corner of the display does not show 16, press the 16/9-TRI button again until it does.) 3. Press the PUSH TO TALK button on the microphone and say: "MAYDAY -- MAYDAY -- MAYDAY." 4. Say "THIS IS {name of your boat (three times) and call sign/boat registration number (once)." 5. Repeat "MAYDAY {name of your boat}" once. 6. Tell where you are: (what navigational aids or landmarks are near, or read the latitude and longitude from your GPS). 7. State the nature of your distress (e.g. are you sinking, medical emergency, man overboard, on fire, adrift, etc. ). 8. State the type of assistance you need (medical, towing, pumps, etc.). 9. Give number of persons aboard and conditions of any injured persons. 10. Estimate present seaworthiness of your ship (e.g. how immediate is the danger due to flooding or fire or proximity to shore). 11. Briefly describe your ship, giving ship name (e.g. "Blue Duck is 32 foot cabin cruiser, white hull, blue deck house"). 12. Say: "I WILL BE LISTENING ON CHANNEL 16." 13. End message by saying "THIS IS {name or call sign of your boat}, OVER." 14. Release the PUSH TO TALK button and listen. If you do not get an answer after 30 seconds, repeat your call, beginning at step 3, above.