Uniden SC150B English Owners Manual - Page 11

Installing the Belt Clip, Using the Earphone, hearing damage, be sure to set the Volume - scanners

Get Uniden SC150B PDF manuals and user guides View all Uniden SC150B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

Installing the Belt Clip 1. Place the Belt Clip on the mounting area on the back of the scanner, making sure the holes in the clip line up with the threads in the back of the scanner. 2. Insert the 2 screws into the corresponding holes and tighten. CAUTION: Do not tighten the screws too tight. You could damage the case or clip. Using the Earphone The PHONE jack at the top of the SportCat is a standard 3.5mm stereo phone jack. You can use either the supplied earphone, or a stereo headset of the proper impedance (32Ω). The output of this jack is monaural audio , but you will hear it in both headphones of a stereo headset. IMPORTANT! Be sure to use only the supplied earphone, or stereo headset of the proper impedance (32Ω). Use of an incorrect earphone or stereo headset may be potentially hazardous to your hearing. WARNING: To avoid discomfort or possible hearing damage, be sure to set the Volume Control before plugging in the earphone or proper headphones. A sudden opening of the Squelch may cause unexpected loud audio. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
Installing the Belt Clip
1. Place the Belt Clip on
the mounting area on
the back of the
scanner, making sure
the holes in the clip line
up with the threads in
the back of the
scanner.
2. Insert the 2 screws into the corresponding holes and
tighten.
CAUTION:
Do not tighten the screws too tight. You
could damage the case or clip.
Using the Earphone
The PHONE jack at the top of the SportCat is a standard
3.5mm stereo phone jack. You can use either the supplied
earphone, or a stereo headset of the proper impedance
(32
Ω
). The output of this jack is monaural audio , but you
will hear it in both headphones of a stereo headset.
IMPORTANT!
Be sure to use only the supplied earphone, or stereo
headset of the proper impedance (32
Ω
). Use of an
incorrect earphone or stereo headset may be potentially
hazardous to your hearing.
WARNING:
To avoid discomfort or possible
hearing damage, be sure to set the Volume
Control before plugging in the earphone or proper
headphones. A sudden opening of the Squelch
may cause unexpected loud audio.
11