Uniden SC150B English Owners Manual - Page 8
In SCAN or SEARCH Mode, press, There are 7 Preprogrammed NOAA weather - scanner manual
View all Uniden SC150B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Key Bank Channel x1 1 - 10 y2 11 - 20 z3 21 - 30 {4 31 - 40 |5 41 - 50 }6 51 - 60 ~7 61 - 70 8 71 - 80 9 81 - 90 10 91 - 100 H 4. In SCAN or SEARCH Mode, press to stop H scanning or searching. (HOLD appears on the display.) After you stop the scanner, press again to resume scanning or searching. H GO TO - Use the numeric keypad to enter a channel number, and then press (GO TO) to access that channel. B 5. Use to toggle between Direct Channel Access N and Bank Scanning. 6. Press to toggle the Preprogrammed Search S Band. SRCH appears on the display. 7. Press to start scanning all programmed channels that are not locked out. (SCAN moves across the display during scanning.) D 8. Press to turn ON or OFF the automatic 2-second delay during scanning or searching for active frequencies. (In Delay Mode, DLY appears on the display.) In this mode, when the scanner monitors an active frequency, searching or scanning will not resume until transmission stops for 2 seconds. W 9. There are 7 Preprogrammed NOAA weather channels. Press to find the active NOAA weather channel in your area. WX appears on the display in Weather Mode. 10. Press LL Press to turn the display light ON for 15 seconds. again to manually turn the light OFF. 11. Press and hold until appears on the display. This disables the keypad and prevents any accidental key entries. To enable the keypad, press and hold until disappears from the display. 8