Uniden TRU8888 English Owners Manual - Page 14

GETTING STARTED note •An extra handset can be registered when the main base is in standby mode. •If a handset has ever been registered to a different base, you must de-register the handset before you can register it to the new base (see page 14). Register the Handset If you purchase an expansion handset, you need to register the handset before use. Only one handset can be registered at a time. Handsets supplied with the phone are registered to the base by the factory. When charged, pre-registered handsets display a handset ID number. Handsets that have not been registered display Models vary! Charge handset on the base for registration or refere to Owner' Manual. When you register an extra handset to the base, the handset ID will be assigned. The ELX500, TCX400, TCX440, and TCX805 all use the same registration steps. Follow the steps below to register your expansion handset. 1) Before registering the extra handset, the battery pack MUST be charged for 15-20 hours. 2) With the main base in standby mode, press the MENU soft key on the base. 3) Press /vol/∧ or /vol/∨ on the base to select HS Registration, and then press the OK soft key. 4) On the handset, press and hold # for two seconds. To cancel registration, press the CANCEL soft key on the base. 5) While the handset is registering, Handset Registering will appear in the Handset LCD. When Registration Complete is displayed, the handset has been registered to the base. If Registration Failed appears, please try these steps again. [13] GETTING STARTED www.uniden.com