Uniden TRU8888 English Owners Manual - Page 65

THE INTEGRATED ANSWERING DEVICE 4) After the command has finished, you will hear intermittent beeps indicating that the system is waiting for a command. You may enter another command at this time from the chart above. 5) When you are finished, press end to exit the system. Remote access away from home You can operate your answering system from a remote location using any touchtone telephone. 1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sound a series of beeps. 2) During the greeting message (or a series of beeps when the answering system is off), press 0 and enter your PIN code within two seconds (see "Setting a PIN Code" on page 54). 3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero." You will hear a beep. 4) Enter a command within 15 seconds, each command there after must be entered within two seconds. You may select a command from the following chart: note •The time stamp will not be heard until you have set the time. See "Setting Day and Time" on page 25. •The system will only playback messages for four minutes and then it returns to the command waiting mode. To continue playing your messages, press 0 then 2 again within 15 seconds. •If you enter an incorrect PIN code three times, you will hear a beep and the system will return to standby. •During the remote operation, Line Remote appears on the display. www.uniden.com THE INTEGRATED ANSWERING DEVICE [64]