ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. - Page 19
Mounting the Projector, Screw type: M4 x 8
View all ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
61 Mounting the Projector NOTE: If you buy a third-party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount. 2. Ensure the screws used to attach a mount to the projector meet the following specifications: • Screw type: M4 x 8 • Maximum Screw length: 8 mm LS550W / LS550WH 199 LS500W / LS500WH 199 NOTE: • Avoid installing the projector near a heat source. • Keep at least a 10 cm gap between the ceiling and the bottom of the projector. 19 61
19
Mounting the Projector
NOTE:
If you buy a third-party mount, please use the correct screw size. Screw size
can vary depending on the thickness of the mounting plate.
1.
To ensure the most secure installation, please use a ViewSonic® wall or ceiling
mount.
2.
Ensure the screws used to attach a mount to the projector meet the following
specifications:
•
Screw type: M4 x 8
•
Maximum Screw length: 8 mm
LS550W / LS550WH
LS500W / LS500WH
61
199
61
199
NOTE:
•
Avoid installing the projector near a heat source.
•
Keep at least a 10 cm gap between the ceiling and the bottom of the
projector.