ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. - Page 34

Controlling the Projector through a LAN Environment, ADVANCED, LAN Settings, DHCP ON, DNS Server

Get ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 PDF manuals and user guides View all ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. 709 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Controlling the Projector through a LAN Environment NOTE: This function is only available for LS550W/LS550WH. The projector supports Crestron® software. With correct settings for the LAN Control Settings menu, you can manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. LS550W LS550WH Configuring the LAN Control Settings • If you are in a DHCP environment: 1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port. 2. Open the OSD menu and go to the ADVANCED > LAN Control Settings menu. Press Enter to display the LAN Control Settings page. Or you can press Network to open the LAN Control Settings menu directly. 3. Highlight LAN Settings and press / to select DHCP ON. 4. Press to highlight Apply and press Enter. 5. Please wait for around 15 - 20 seconds, and then re-enter the LAN Settings page. The Projector IP Address, Subnet Mask, Default Gateway, DNS Server settings will be displayed. Make note of the IP address displayed in the Projector IP Address row. NOTE: • If the Projector IP Address still does not appear, contact your network administrator. 34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
34
Controlling the Projector through a LAN Environment
NOTE:
This func°on is only available for LS550W/LS550WH.
The projector supports Crestron® software. With correct settings for the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same
local area network.
LS550WH
LS550W
Configuring the LAN Control Settings
•
If you are in a DHCP environment:
1.
Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port.
2.
Open the OSD menu and go to the
ADVANCED
>
LAN Control Settings
menu.
Press
Enter
to display the
LAN Control Settings
page. Or you can press
Network
to open the
LAN Control Settings
menu directly.
3.
Highlight
LAN Settings
and press
/
to select
DHCP ON
.
4.
Press
to highlight
Apply
and press
Enter
.
5.
Please wait for around 15 - 20 seconds, and then re-enter the
LAN Settings
page. The
Projector IP Address
,
Subnet Mask
,
Default Gateway
,
DNS Server
se´ngs will be displayed. Make note of the IP address displayed in the
Projector IP Address
row.
NOTE:
• If the
Projector IP Address
s°ll does not appear, contact your network
administrator.