ViewSonic LS550WH - 3000 LED Lumens WXGA Short Throw LED Projector w/ 125% Rec. - Page 70

Maintenance, General Precautions, Cleaning the Lens, Disclaimer

Page 70 highlights

Maintenance General Precautions • Make sure the Projector is turned off and the power cable is unplugged from the power outlet. • Never remove any parts from the Projector. Contact ViewSonic® or a reseller when any part of the Projector needs replacing. • Never spray or pour any liquid directly onto the case. • Handle the Projector with care, as a darker-colored projector, if scuffed, may show marks more clearly than a lighter-colored projector. Cleaning the Lens • Use a canister of compressed air to remove dust. • If the lens is still not clean, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe the surface. CAUTION: Never rub the lens with abrasive materials. Cleaning the Case • Use a soft, lint-free, dry cloth to remove dirt or dust. • If the case is still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface. CAUTION: Never use wax, alcohol, benzene, thinner, or other chemical detergents. Storing the Projector If you intend to store the Projector for an extended period of time: • Ensure the temperature and humidity of the storage area are within the recommend range. • Retract the adjuster foot completely. • Remove the batteries from the Remote Control. • Pack the Projector in its original packaging or equivalent. Disclaimer • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. 70

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83

70
Maintenance
General Precautions
Make sure the Projector is turned off and the power cable is unplugged from the
power outlet.
• Never remove any parts from the Projector. Contact ViewSonic® or a reseller
when any part of the Projector needs replacing.
• Never spray or pour any liquid directly onto the case.
Handle the Projector with care, as a darker-colored projector, if scuffed, may
show marks more clearly than a lighter-colored projector.
Cleaning the Lens
• Use a canister of compressed air to remove dust.
If the lens is s°ll not clean, use lens-cleaning paper or moisten a soſt cloth with
lens cleaner and gently wipe the surface.
CAUTION:
Never rub the lens with abrasive materials.
Cleaning the Case
Use a soſt, lint-free, dry cloth to remove dirt or dust.
If the case is s°ll not clean, apply a small amount of non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soſt, lint-free cloth, then wipe
the surface.
CAUTION:
Never use wax, alcohol, benzene, thinner, or other chemical detergents.
Storing the Projector
If you intend to store the Projector for an extended period of time:
• Ensure the temperature and humidity of the storage area are within the
recommend range.
• Retract the adjuster foot completely.
Remove the ba²eries from the Remote Control.
• Pack the Projector in its original packaging or equivalent.
Disclaimer
• ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the lens or case. Some chemical cleaners have been reported to
damage the lens and/or case of the projector.
ViewSonic® will not be liable for damage resul°ng from use of any ammonia or
alcohol-based cleaners.