ViewSonic PJ255D User Manual - Page 29
ViewSonic PJ255D Manual
View all ViewSonic PJ255D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Changing the lamp The projector will detect the lamp life itself. It will show you a warning message The Lamp has been in use for over 1400 hours. You should purchase a spare bulb. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible or refer to the following instructions to replace it yourself. Warning: Lamp Make sure the projector has been cooled down for at least 30 compartment is hot! minutes before changing the lamp. Allow it to cool down before changing lamp! 2 1 3 Lamp Changing Procedure: Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. 1. Turn off the power to the projector by pressing the Power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to remove 2 screws from the cover. 5. Remove the cover. 6. Remove the 2 screws from the lamp module. 7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. 3 3