ViewSonic PJ502 User Manual - Page 15
Connecting power supply
View all ViewSonic PJ502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Connecting power supply WARNING X Please use extra caution when connecting the power cord as incorrect or faulty connections may result in fire and/or electrical shock. * Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one. * Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. * Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug. AC Inlet Connector of the power cord 1. Connect the connector of the power cord to the AC inlet of the projector. 2. Firmly plug the power cord's plug into the outlet. ViewSonic PJ502 12
ViewSonic
PJ502
12
Connecting power supply
1.
Connect the connector of the power cord to the AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
WARNING
Please use extra caution when connecting the power cord as incorrect or faulty
con-
nections may result in fire and/or electrical shock.
* Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
* Only plug the power cord into an outlet rated for use with the power cord's specified
volt-
age range.
* Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
AC Inlet
Connector
of the
power cord