ViewSonic PJ502 User Manual - Page 28

INPUT menu With the INPUT menu, items shown in the table below can be performed. Select an item using the menu cursor buttons S/T, and press the menu cursor button X or the ENTER button on the remote control to progress. Then perform it referring to the following table. Item COLOR SPACE Description Using the buttons S/T switches the mode for color space. AUTO RGB SMPTE240 REC709 REC601 COMPONENT VIDEO FORMAT * This item can be selected only at a RGB input or a component video input. * The AUTO mode automatically selects the optimum mode. * The AUTO operation may not work well at some signals. In such a case, it might be good to select the SMPTE240 or the REC709. Using the buttons S/T switches the function of COMPONENT VIDEO port. When the SCART RGB is selected, the COMPONENT port function as a port for a SCART RGB signal input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, ask your dealer. COMPONENT SCART RGB Using the buttons S/T switches the mode for video format. AUTO NTSC PAL SECAM FRAME LOCK INFORMATION N-PAL M-PAL NTSC4.43 * This item performs only at a video input from the VIDEO port or the S-VIDEO port. For a component video signal, the signal type is identified automatically independently of this function. * The AUTO mode automatically selects the optimum mode. * The AUTO operation may not work well at some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal. Using the buttons S/T turns the frame lock function on/off. TURN ON TURN OFF * This item performs only at a RGB input with vertical frequency of 48 to 72 --> 50 to 60 Hz. * When the TURN ON is selected, a moving picture is displayed more smoothly. * This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Selecting this item displays a dialog titled "INPUT INFORMATION". It shows the information about the current input. * The "FRAME LOCK" message on the dialog means the frame lock function is working. This function automatically works when a RGB signal with vertical frequency of 50 to 60 Hz is input, and it displays a moving picture more smoothly. * The "SCART RGB" message means the COMPONENTVIDEO port is working as a SCART RGB port. Please refer to the item COMPONENT in this section. ViewSonic PJ502 25