ViewSonic PJ502 User Manual - Page 23
Multifunctional setting, Using the menu function
View all ViewSonic PJ502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Multifunctional setting Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION and EASY MENU. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. 1. Press the MENU button on the remote control or one of the menu cursor buttons on the projector. The advanced MENU or EASY MENU will appear. 2. Use the menu cursor buttons S/T to select a menu. At the EASY MENU If you want to change it to the advanced MENU, select the "Go to Advanced Menu". At the advanced MENU Select a menu of PICTURE, IMAGE, INPUT, SETUP, SCREEN or OPTION. If you want to change it to the EASY MENU, select the EASY MENU. 3. Then press the menu cursor button X or the ENTER button on the remote control to progress. The display of the selected menu will be active. 4. Use the menu cursor buttons S/T to select an item to operate. Then press the menu cursor button X or the ENTER button on the remote control to progress. The operation menu of the selected item will appear. 5. Use the cursor buttons S/T to operate the item. When you want to reset the operation, press the RESET button on the remote control during the operation. Note that items whose functions are performed simultaneously with operation (ex. LANGUAGE, H PHASE etc.) aren't reset. When you want to return to the previous display, press the cursor button W. 6. Press the MENU button on the remote control again to close the menu and complete this operation. Even if you don't do anything, the dialog will automatically disappear after about 10 seconds. ViewSonic PJ502 20