ViewSonic PJ658 PJ658 User Guide - Page 37

INPUT Menu (continued) INPUT Menu Item COMPONENT VIDEO FORMAT FRAME LOCK RGB IN Description Using the buttons ▲/▼ switches the function of COMPONENT VIDEO port. COMPONENT  SCART RGB When the SCART RGB is selected, the COMPONENT VIDEO port function as a port for a SCART RGB signal input and VIDEO port function as a port for SCART RGB sync input. A SCART adapter and SCART cable realize a SCART RGB input to the projector. For details, contact your dealer. Set the video format for the s-video port and video port. (1) Use the ◄/► buttons to select the input port. (2) Using the buttons ▲/▼ switches the mode for video format. AUTO  NTSC  PAL  SECAM N-PAL  M-PAL  NTSC4.43 • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well for some signals. If the picture becomes unstable (ex. an irregular picture, a color lack), please select the mode depending on the input signal. Using the buttons ▲/▼ turns the frame lock function on/off. TURN ON  TURN OFF • This item performs only at a RGB signal with vertical frequency of 50 to 60 Hz. • When the TURN ON is selected, a moving picture is displayed more smoothly. • This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF. Set the RGB input signal type for the RGB port. (1) Use the ◄/► buttons to select the RGB port to be set. RGB1  RGB2 ���� (2) Use the ▲/▼ buttons to select the RGB input signal type. ���� SYNC ON G ON  SYNC ON G OFF • Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC ON G. • In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal. ViewSonic PJ658 33