ViewSonic PJ658 PJ658 User Guide - Page 47
Description, SERVICE, REMOTE FREQ., INFORMATION, FACTORY RESET, ViewSonic
UPC - 766907222210
View all ViewSonic PJ658 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
OPTION Menu OPTION Menu (continued) Item Description REMOTE FREQ. Use the ▲/▼ button to change the Projector's remote sensor setting. 1:NORMAL 2:HIGH Items with a checkmark are on. The factory default setting is for both 1:NORMAL and 2:HIGH to be on. If the remote control does not function correctly set the this to either only 1 or only 2 as described in Remote Control Settings. Neither can be turned off at the same time. INFORMATION Selecting this item displays a dialog titled "INPUT INFORMATION". It shows the information about the current input. SERVICE INPUT-INFORMATION RGB 1024x768 @60Hz FRAME LOCK INPUT-INFORMATION S-VIDEO SECAM AUTO INPUT-INFORMATION COMPONENT 576i @50 SCART RGB • The "FRAME LOCK" message on the dialog means the frame lock function is working. • The "SCART RGB" message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in this menu. • This item can't be selected for no signal and sync out. FACTORY RESET Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LANGUAGE and OPTION_SECURITY are not reset. RESET CANCEL ViewSonic PJ658 43