ViewSonic PJ658 PJ658 User Guide - Page 43

Description, MESSAGE, SOURCE NAME, ViewSonic

Page 43 highlights

SCREEN Menu SCREEN Menu (continued) Item MESSAGE SOURCE NAME Description Using the buttons ▲/▼ turns on/off the message function. TURN ON  TURN OFF When the TURN ON is selected, the following message function works. "AUTO IN PROGRESS" while automatically adjusting "NO INPUT IS DETECTED" "SYNC IS OUT OF RANGE" "Searching...." while searching for the input "Detecting...." while an input signal is detected The indication of the input signal displayed by changing The indication of the aspect ration displayed by changing The indication of the My Memory displayed by changing The indication of the Picture Mode displayed by changing The indication of "FREEZE" and "II" while freezing the screen by pressing the FREEZE button. • When the TURN OFF is selected, please remember if the picture is freezing. Do not mistake freezing for a malfunction. Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ buttons on the SCREEN NAME menu to select the port to be named and press the ► button. The SOURCE NAME dialog will be displayed. SOURCE NAME MENU *Right side of the menu is blank until a name is specified (3) The current name will be displayed on the first line. Use the and ENTER or INPUT buttons to select and enter characters. The RESET button can be used to erase 1 character at a time. The name can be a maximum of 16 characters. � (4) To change an already inserted character, press the ▲ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the ◄/► buttons to select character to be changed. Once a character in the name is � selected use the ▼ button to move the cur- sor back down to the character entry area to select and enter characters as described above. (5) Select and press the ENTER or IN- � PUT buttons when finished entering text. To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously. ViewSonic PJ658 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

SCREEN Menu
Item
Description
MESSAGE
Using the buttons ▲/▼ turns on/off the message function.
TURN ON
TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
”NO INPUT IS DETECTED”
”SYNC IS OUT OF RANGE”
“Searching….” while searching for the input
”Detecting….” while an input signal is detected
The indication of the input signal displayed by changing
The indication of the aspect ration displayed by changing
The indication of the My Memory displayed by changing
The indication of the Picture Mode displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by
pressing the FREEZE button.
• When the TURN OFF is selected, please remember if the picture
is freezing. Do not mistake freezing for a malfunction.
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN
menu to select SOURCE NAME and press
the ► button. The SOURCE NAME menu
will be displayed.
(2) Use the ▲/▼ buttons on the SCREEN
NAME menu to select the port to be named
and press the ► button. The SOURCE
NAME dialog will be displayed.
(3) The current name will be displayed on
the first line. Use the ◄/►/▲/▼ and EN-
TER or INPUT buttons to select and enter
characters. The RESET button can be used
to erase 1 character at a time. The name
can be a maximum of 16 characters.
(4) To change an already inserted charac-
ter, press the ▲ button while the cursor is
on the [A-N] row to move the cursor to the
name displayed on the first line and use
the ◄/► buttons to select character to be
changed. Once a character in the name is
selected use the ▼ button to move the cur-
sor back down to the character entry area
to select and enter characters as described
above.
(5) Select
and press the ENTER or IN-
PUT buttons when finished entering text.
To revert to the previous name without sav-
ing changes press the ESC or ◄ button and
the INPUT button simultaneously.
SCREEN Menu (continued)
�·¸¼²È�ÁÂÃÄ
�Á�Â�Ã�Ä
¸�Ã�»�×�²�Ù�Â�Ö�Õ�å�±�½�¼�·
¶�Æ�ä�Á�´�µ�¹�Û�Ø�º�³�è
Î�ò�Ð�Ì�Ñ�ó�ô�Ô�à�õ�ñ�â�Ü�Ï
Ê�Ý�ö�Þ�ã�Ë�Ò�Í�÷�ë�ß�ø
¿�Ä�é�É�Ç�æ�ç�ì�í�î
��ê�ù�Ó�ú�û�ü�ý
È´²½²»µ�
²·µ²Á
�þ��È·²ºµ
²´»
�þ���¾���Èä¹Õµ
´¶¹Á»²�·¸¼²
�����ÁÂÃÄ�á�
�����ÁÂÃé�á�ײ´±µ¶Æ�Æ»
»¶¼Æ¶·²·µ�á�×Û×
��´êÛÕײ¶�á�»¸¼²Á¸
����ÛÕײ¶�á�ÛµÁ
SOURCE NAME MENU
*Right side of the menu is blank
until a name is specified
�·¸¼²È�ÁÂÃÄ
�Á�Â�Ã�Ä
¸�Ã�»�×�²�Ù�Â�Ö�Õ�å�±�½�¼�·
¶�Æ�ä�Á�´�µ�¹�Û�Ø�º�³�è
Î�ò�Ð�Ì�Ñ�ó�ô�Ô�à�õ�ñ�â�Ü�Ï
Ê�Ý�ö�Þ�ã�Ë�Ò�Í�÷�ë�ß�ø
¿�Ä�é�É�Ç�æ�ç�ì�í�î
��ê�ù�Ó�ú�û�ü�ý
È´²½²»µ�
²´»
�þ���¾���Èä¹Õµ
�·¸¼²È�ÁÂÃÄ
�Á�Â�Ã�Ä
¸�Ã�»�×�²�Ù�Â�Ö�Õ�å�±�½�¼�·
¶�Æ�ä�Á�´�µ�¹�Û�Ø�º�³�è
Î�ò�Ð�Ì�Ñ�ó�ô�Ô�à�õ�ñ�â�Ü�Ï
Ê�Ý�ö�Þ�ã�Ë�Ò�Í�÷�ë�ß�ø
¿�Ä�é�É�Ç�æ�ç�ì�í�î
��ê�ù�Ó�ú�û�ü�ý
È´²½²»µ�
²·µ²Á
�þ��È·²ºµ
²´»
�þ���¾���Èä¹Õµ
39
ViewSonic
PJ658